1. Husqvarna Motorcycles Made In Sweden - About 1988 and older

Boring/honing cylinders who r u using?

Discussion in 'Vintage/Left Kickers' started by highdez1981430cr, Nov 20, 2009.

  1. highdez1981430cr Husqvarna
    AA Class

    Location:
    Yucca Valley,Ca.
    So. Cal. Area
    highdez1981430cr, Nov 20, 2009
    #1

  2. ruwfo Administrator

    Location:
    NJ
    Husqvarna Motorcycle:
    1980 390CR, 1982 430CR, 1984 400WR
    Other Motorcycles:
    1985 250XC, 2016 FJ-09
    Exchange service

    Rick Horvat, has a exchange service, send him you old cylinder & he'll
    sent you a complete top end, new piston/rings,gasket freshly bored
    & ready to drop on. Beautiful work & fast turn around too , i got
    one for my 84 500CR.

    He'll even take your pistons in a exchange if you bought the wrong
    size or have a new unused set , in exchange for what you need.

    He does all types of bikes not just Husky too.

    later
    John
    ruwfo, Nov 20, 2009
    #2

  3. highdez1981430cr Husqvarna
    AA Class

    Location:
    Yucca Valley,Ca.
    Talked to Rick tonite

    He is the man,nice to talk to someone who loves what they do!
    highdez1981430cr, Nov 21, 2009
    #3

  4. auto Husqvarna
    AA Class

    Location:
    NJ,USA
    Husqvarna Motorcycle:
    too many
    I've heard as much good as I've heard as much bad about rick.Not trying to slam him.Just calling it as I see it.
    auto, Nov 21, 2009
    #4

  5. highdez1981430cr Husqvarna
    AA Class

    Location:
    Yucca Valley,Ca.
    What bad have you heard?
    highdez1981430cr, Nov 22, 2009
    #5

  6. flamepainter78 Husqvarna
    AA Class

    Location:
    norton,ohio
    Hi.I use rick horvat all the time, live close to me. nothing to bad say about him,great guy,has anything you need for your husky.
    flamepainter78, Nov 22, 2009
    #6

  7. HuskyT Moderator

    Location:
    Corona, California
    Guys... I don't want this thread to turn into a disparaging thread about anyone. HiDez has a question that he needs answered.The question is a good one that deserves some serious input.

    I'll be honest about this, our forum, especially the vintage members, are encouraged to hold things to a very high standard. If you have good positive information post it up. If not, and you have less than positive information and feel that it needs brought up, as well as merits discussion along the lines of the thread topic, feel free to post up.

    T
    HuskyT, Nov 22, 2009
    #7

  8. HuskyT Moderator

    Location:
    Corona, California
    HuskyT, Nov 23, 2009
    #8

  9. Leftcoast leftkicker Husqvarna
    AA Class

    Location:
    encinitas ca
    I have used Rick exclusively for over 4 years and have found him always to knowledgeable & fair. He can be slow to respond at times but it's only because he's a 1-man band and does business all around the globe.

    As much as I love old bikes I have to say that most of the vendors in this small niche of the motorcycle world are very, very challenging to do business with. Rick is not one of those guys.
    Leftcoast leftkicker, Nov 23, 2009
    #9