1. 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     TE = 4st Enduro & TC = 4st Cross

Braking 320mm wave rotor

Discussion in '4 Stroke' started by foxracing, Jul 17, 2009.

  1. foxracing Husqvarna
    AA Class

    Location:
    Singapore
    Has anyone swapped out their Brembo front rotors for a Braking one? Which part number did you order up? Was it the STX59D or SK059L? :confused:
    foxracing, Jul 17, 2009
    #1

  2. jmetteer Husqvarna
    Pro Class

    Location:
    Woodland, WA
    Husqvarna Motorcycle:
    TXC300 CR125 CR144
    Other Motorcycles:
    WR250F, TRANSALP
    I ordered the Braking wave rotors for my TXC250 from Kelly at Motosportz, the numbers on them are 8000H0192 front, and 8000H0195 rear.

    Email Kelly and he can hook you up, I think he is out for the weekend but will be back in the office monday.

    Motosportz@gmail.com

    Later,
    jmetteer, Jul 17, 2009
    #2

  3. foxracing Husqvarna
    AA Class

    Location:
    Singapore
    Offroad rotors are straight so they are less of a hassle but the 320mm rotors on the SMRs have a slight offset outwards.

    Here's a pic to show the offset...
    [IMG]
    foxracing, Jul 18, 2009
    #3

  4. huskyfrk Husqvarna
    AA Class

    Location:
    los alamitos Ca
    rotor

    the hat is offset, the rotor is flat. you don't need to order a hat, just the rotor. unless you are going to have a spare set of wheels ready to go. :thumbsup::thumbsup::thumbsup:
    huskyfrk, Jul 18, 2009
    #4

  5. Muddy Waters Husqvarna
    AA Class

    Location:
    On the islands
    Sorry for jumping subject but what are those sliders you are using ?

    :thumbsup:
    Muddy Waters, Jul 18, 2009
    #5