Broken LH mirror perch... Where can I get one?

Discussion in 'TR650' started by kyle01, Dec 24, 2014.

  1. kyle01 Husqvarna
    AA Class

    Location:
    Chicago il
    Husqvarna Motorcycle:
    TR650
    Other Motorcycles:
    Beta 430, Honda CR 144, XS650
    So the pig went down and when the dust settled, my left hand mirror had parted ways with the clutch lever/mirror perch. It snapped off but is only the front part (the clamping part) that was damaged. Does anyone know if I'll be able to find one of these? My dealer is so useless I'd rather ride with no mirror over dealing with them. JB weld will work for a bit, but I'd like to fix it. I'm not opposed to replacing the clutch lever if that's what it's gonna take
  2. Ogre_fl Husqvarna
    Pro Class

    Location:
    Cook Bayou, FL
    Husqvarna Motorcycle:
    Terra 650
    Other Motorcycles:
    Tiger 1050
    Its part 9 that is broke, right?
    That is a standard BMW part, around $20
    BMW part # 32722345420

    [IMG]
    PaulC likes this.
  3. kyle01 Husqvarna
    AA Class

    Location:
    Chicago il
    Husqvarna Motorcycle:
    TR650
    Other Motorcycles:
    Beta 430, Honda CR 144, XS650
    Merry Christmas to me!!! Thanks a LOT!
  4. glitch_oz Husqvarna
    Pro Class

    Location:
    AUS
    Husqvarna Motorcycle:
    Strada
    Or see any other bike dealer/ wrecker etc. for one of those, as they are pretty much all the same on nearly all bikes (except Yamaha, which uses left-hand mirror threads on the clutch perch), only the distance between the holes varies. The holes usually are 1/4" - 6mm
    Also check for mirror threads, which are usually either 8 or 10mm.
    If one of a Honda road-bike/ Polaris Quad/Buell/Suzuki/ Aprilia etc etc doesn't fit, it could well be one of a Taiwanese scooter. Take the old one along as a sample. 5 bux should see you sorted.