1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

All 2st Can I use 4stroke engine oil in the WR300 gearbox?

Discussion in '2 Stroke' started by Sandgroper, Feb 18, 2011.

  1. Sandgroper Husqvarna
    AA Class

    Location:
    Dubai
    Such as..

    [IMG]

    ?
    Sandgroper, Feb 18, 2011
    #1

  2. Rob578 Husqvarna
    AA Class

    Location:
    Atlanta GA was CA
    Husqvarna Motorcycle:
    Beta 300RR Beta 500RS TE 630
    Other Motorcycles:
    Honda 919 sold FJR1300 sold
    I wouldn't use a synthetic oil in the gearbox, possible clutch slip issues. I use Ford ATF and it works for me but this issue has been debated endlessly.
    Rob578, Feb 18, 2011
    #2

  3. Sandgroper Husqvarna
    AA Class

    Location:
    Dubai
    The only reason I was thinking of using it was because I have a few bottles left over from my old 09 510TXC. Didnt seem have any issues with clutch slip.
    Sandgroper, Feb 18, 2011
    #3

  4. ajaxauto Husqvarna
    Pro Class

    I use 15/50 in both my CR 125 and WR 250 My CR 125 is on its 4 th year of racing same clutch and same lower end the WR went 5 year before a clutch and lower end so it must work
    ajaxauto, Feb 18, 2011
    #4

  5. Motosportz CH Sponsor

    Location:
    Vancouver WA
    Husqvarna Motorcycle:
    2021 TE250i, 570 Berg, 500 KTM, 790R
    Other Motorcycles:
    many
    The simple answer is yes. But you do need to make sure the oil does not have a lot of fiction modifiers in it or it can slip. I have for years used this in all my bikes, I like it better than rotella and it seems to works well / recommended by my engine guy.

    [IMG]
    Motosportz, Feb 18, 2011
    #5

  6. BadMotoWeazal Husqvarna
    Pro Class

    Location:
    Alabama
    yep...both the Rotella T & the Delvac are great cheaper options. As for the Mobil 4T, if it has no moly in it, it should be o.k.
    BadMotoWeazal, Feb 18, 2011
    #6