1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
    WR = 2st Enduro & CR = 2st Cross

250-500cc Can someone tell me what this is?

Discussion in '2 Stroke' started by marcmo0, May 23, 2016.

  1. marcmo0 Husqvarna
    AA Class

    Location:
    Auburn, WA
    Husqvarna Motorcycle:
    09 WR300
    Other Motorcycles:
    Yamaha YZ250
    Went to load bike and noticed this hanging down. Can someone tell me what it is and where I can find another one? (the broken ceramic piece that looks like the butt of a cigarette, with wire all pulled out) Husky Part.jpeg
  2. 2premo Husqvarna
    Pro Class

    Location:
    Northern NV
    Husqvarna Motorcycle:
    98 WR360, 1987 WR430, 1988 XC430
    Other Motorcycles:
    Sherco 300, 2002 KTM 380EXC
    that according to your picture and description looks like an old school ballast resistor
    ohmygewd likes this.
  3. marcmo0 Husqvarna
    AA Class

    Location:
    Auburn, WA
    Husqvarna Motorcycle:
    09 WR300
    Other Motorcycles:
    Yamaha YZ250
    Thanks 2premo. Do you know if I can replace with any type of resistor? or? I have never been good with electronics. I took off the tank and the other half is still tucked under a zip tie along with the rest of wiring running along frame.
  4. 2premo Husqvarna
    Pro Class

    Location:
    Northern NV
    Husqvarna Motorcycle:
    98 WR360, 1987 WR430, 1988 XC430
    Other Motorcycles:
    Sherco 300, 2002 KTM 380EXC
    not sure it came with the bike
    what model CC and year is yours?
  5. marcmo0 Husqvarna
    AA Class

    Location:
    Auburn, WA
    Husqvarna Motorcycle:
    09 WR300
    Other Motorcycles:
    Yamaha YZ250
    2009 wr300. I did see anything like it on the wiring diagram, but admittedly I electrical issues are not my strong suit
  6. gazmcfaza Husqvarna
    AA Class

    Location:
    uk
    Husqvarna Motorcycle:
    husky wre 125
    Other Motorcycles:
    , yamaha xt 125
    that's not a thermostat is it? Not sure if the newer ones have any but my bike came with one standard, bolted from a wire like that into the cylinder head on a small clip
  7. troy deck Husqvarna
    Pro Class

    Location:
    Republic MO
    Husqvarna Motorcycle:
    87 250wr 12 cr125
    Other Motorcycles:
    kx65 ty80 rm80 kdx250
    YOUR THINKIN OF A TEMP PROBE FOR A FAN AREN'T YOU? THE THERMOSTAT WOULD BE IN A COOLANT HOSE
  8. rancher1 Husqvarna
    Pro Class

    Location:
    WA
    It is electrical protection for the speedometer instrument.
    NCSteve and marcmo0 like this.
  9. marcmo0 Husqvarna
    AA Class

    Location:
    Auburn, WA
    Husqvarna Motorcycle:
    09 WR300
    Other Motorcycles:
    Yamaha YZ250
    Thanks! I am going to cut it off an cap it. I don't have the speedo anymore. Cheers everyone. Great help!!
    :cheers: