1. 4 Stroke Husqvarna Motorcycles Made In Austria - About 2014 & Newer
     FE = 4st Enduro & FC = 4st Cross

FE/FC Can't get nutural

Discussion in '4st' started by tommyk, Apr 2, 2015.

  1. tommyk Husqvarna
    C Class

    Husqvarna Motorcycle:
    630 sms
    Other Motorcycles:
    zx10r
    Hi , I have a 2010 sms 630, and when the bike is running I can not take it out of gear... And no amount of blipping helps. If anybody could help I'd be very great full ,
    Regards Tommy.
    tommyk, Apr 2, 2015
    #1

  2. Tinken Husqvarna
    Pro Class

    Location:
    Hesperia, CA
    Husqvarna Motorcycle:
    MY12 WR511
    Other Motorcycles:
    Yamaha
    I had a similar issue to this on my 525. Turns out that my clutch was not disengaging fully and the addition of thinner oil did the trick. I know use Mobil1 0W40.
    Tinken, Apr 2, 2015
    #2
    NCSteve likes this.

  3. NCSteve Husqvarna
    Pro Class

    Location:
    Appalachia
    Husqvarna Motorcycle:
    12 WR300 13 WR165
    Other Motorcycles:
    02 XR250R 00 XR100R
    +1 Great oil, been my fav for winter in my XR's and now in the WR300. Here the 0-40wt is called Euro blend and I find 5qt bottles at Advance Auto cost the same as quarts at W'mart.
    NCSteve, Apr 3, 2015
    #3

  4. Tinken Husqvarna
    Pro Class

    Location:
    Hesperia, CA
    Husqvarna Motorcycle:
    MY12 WR511
    Other Motorcycles:
    Yamaha
    It's possible that either the clutch is not fully disengaging, putting pressure on the shifter fork, or the fork is bent. More than likely the clutch. Does it shift to neutral when really hot, or not at all.
    Tinken, Apr 3, 2015
    #4