1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

125-200cc Chain block

Discussion in '2 Stroke' started by MatMann, Jul 22, 2013.

  1. MatMann Husqvarna
    A Class

    Location:
    Melbourne, Australia
    Husqvarna Motorcycle:
    '13 WR125
    anyone know of a chin block that will accommodate a 51/53t rear sprocket?
    MatMann, Jul 22, 2013
    #1

  2. Down Under XC Husqvarna
    AA Class

    Location:
    Melbourne, Australia
    Husqvarna Motorcycle:
    XC250 83', WR250 87','XC150 10
    Other Motorcycles:
    WR165 10, 83 KDX 250,
    Hi Matmann,
    We have run the standard chain block with the 50 tooth sprocket for 18 months and the diameter increase of 1 or 2 or 3 teeth I would of thought should not be an issue. I also thought their was adjustment via different holes???
    Check out Motosportz web site they are a sponsor on this site, they have pretty good pics available. You did get the CD / disk from your dealer that gives part numbers etc for all components ???
    Down Under XC, Jul 23, 2013
    #2