250-500cc Cheap footpegs?

I did a search and can't find what I need. I'm looking for some 'inexpensive' foot pegs for a '08 WR250. I think the factory Yamaha or Honda pegs will work if you grind down the bolt bushing. Can anyone confirm or advise me on a cost effective set of pegs (they're going on a back up bike that my College kid will ride 3-4 times a year) - Thanks John

all foot pegs on 2 smokes are interchangeable from 95 to the end of the Italian era
not sure when the 4 strokes changed but all 2001 on i am sure will fit
go get a good used OEM set, seeing them for 40us shipped on fleabay

What DD said

Ive got a set of those work well did have to cut a slither out of the corners to allow full flippy uppy ness.

Has anyone had to try and find replacement gripper things for the ebay pegs?

How many do you need? I can remove some or measure threads think thyre the same studs on some crankbrothers peddles.

Hi Dirtdame. How do you like those aluminum pegs? Does the lack of teeth through the middle of the peg cause you any grip issues? Have any of the press-in teeth loosened or come out. Thanks!

I have not ordered a set yet, just thinking if the grippers might be hard to find, since they are off brand.
If you find out, that would be great info. Thank you.

I took them all out and blue loc tited them in, do check as some were loose.

Not expensive at all, Offer fantastic grip, If the teeth get blunt you can buy just the replacement tops.
If the bike not getting ridden I spose its not worth spending your money on them but if being used a lot these are just superb.

Where can you order those Apicos? I also like the idea of replaceable teeth, but I'm leery of aluminum pegs as I've heard and read of them busting off or bending on rocks and logs, which is akin to what I ride on. Any aluminum peg users out there? What are your experiences w/them compared to steel pegs?

After a little searching on FleaBay, they have a ton of low cost options...

I put DRC footpegs on my SMS630 a couple of years ago. They were about $80 a pair. Fit and quality are excellent. I would buy them again. Cam.

Yup greedbay has em all, the ali ones dd posted are tough mothers
All i know is stay away from titanium as that and rocks dont last ali bends titanium footpegs crack n break

Motosportz Husqvarna has a two peg options both regular and slightly lowered. http://www.motosportzhusqvarna.com/Husqvarna WR,CR 250-300.htm
They are burly. $54.

I bought the Apicos one ebay for my bike. The quality is top notch, they are very sharp. I might even file them down a bit if I ever got replacement cleats.

Cool. Thanks. Do they have husky specific pegs or did you order some yz or gas gas pegs?

Edit: I found some yz apico pegs on ebay but they are all blue. Couldn't find any red or grey yz pegs. Which ones did you get? Thanks!

Yeah I got the Husky specific ones, I saw the blue ones too and just couldn't do it. The company I bought mine from is now longer on ebay