Chinese Zox quad need carb help

Discussion in 'General (Main)' started by HuskyT, Oct 18, 2009.

  1. HuskyT Moderator

    Location:
    Corona, California
    Subject: Chinese zox quad renegade 110

    [IMG]

    Will only run on full choke. Flip choke off motor dies.

    Pulled carb/disassembled .. air filter had a lot of crud impacting airflow.

    [IMG]

    Found small jet (idle???) to have a very slight bend in the tip??? installed this way at factory???. Jets have no numbers on them. can't find any marking on them whatsoever. Holes are clear and unobstructed.

    [IMG]



    How do I know what brand of Carb this is? How do I determine the actual jet size. Do I buy a new carb for about $30 or try and find jets for this one.


    The screw on the right is my idle adjustment?This is the idle jet correct?


    [IMG]

    What is the screw on the left and the screw on the right and proper settings... e.g. 1.5 turns out?????

    Source for jets and or a new carb..... ?

    Note: reassembled after cleaning everything and fresh airfilter screens... will still only run on full choke?????

    T
  2. robertaccio Husqvarna
    Pro Class

    Location:
    San Diego, Ca
    Husqvarna Motorcycle:
    2021 Husqvarna TE300i
    Other Motorcycles:
    99 HusqvarnaTE610, 94 Husaberg FC501
    T,
    I think the whole motor is a Honda clone use the Honda specs? or use the specs from those fast 50s- 110 Honda custom mini machines like from BBR or Powroll, the carb should be a Keihin clone like the type on the XR50 type motors, it is a fwd slant 4 stroke clone right?R