1. 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     TE = 4st Enduro & TC = 4st Cross

Clarke tank on 07 TE450

Discussion in '4 Stroke' started by ScottyR, Jul 14, 2009.

  1. ScottyR Husqvarna
    AA Class

    Location:
    Mitchell, ON
    Does anyone know if a fan works on an 07 TE450 (E3 spec) with the cooling fan?
    ScottyR, Jul 14, 2009
    #1

  2. Coffee CH Owner

    Location:
    Between homes - in ft Wayne IN
    Husqvarna Motorcycle:
    2006 TE250, 2013 TR650 Terra - sold
    Scotty I'm not sure what you are asking.

    If it is an 07 TE450 (E3 spec) that has a cooling fan - the fan should indeed work. Wetdog had one of those in Canada and other people had the E3 07 spec bikes.

    If you don't find what you are looking for I'd ask over at TT cause CH was started in 2008 - after most of the E3 spec bike discussions took place.
    Coffee, Jul 31, 2009
    #2

  3. Swampds Husqvarna
    AA Class

    Location:
    Sarasota Florida
    I have a euro 450 with a Clarke. The fan is pretty tight with the tank but it does fit. I broke my fan because I didn't have rad braces and the rad pushed the fan into the tank. I am kind of concerned with the new braces (OFG). I have not replaced the fan yet but the brace locates the fan with more spacing from the radiator, but it looks to be a little lower also.
    Swampds, Aug 1, 2009
    #3

  4. MOTORHEAD Husqvarna
    Pro Class

    Location:
    Mount Vernon, Indiana
    Husqvarna Motorcycle:
    none
    Other Motorcycles:
    2014 YAMAHA YZ250
    You fan won't work as well with the OFG braces. That extra spacing seems to allow to much air, so it pulls less through the radiator.

    I picked up a set of MOTOSPORTZ braces so I can run the stock bracket.
    MOTORHEAD, Aug 1, 2009
    #4

  5. tallywacker Husqvarna
    B Class

    Location:
    SW Oregon
    Do you know what brand these braces are?

    They have the fan mounting holes already in them.

    Attached Files:

    tallywacker, Aug 2, 2009
    #5