1. Husqvarna Motorcycles Made In Sweden - About 1988 and older

Clutch actuation arm-aftermarket?

Discussion in 'Vintage/Left Kickers' started by ruwfo, Feb 28, 2010.

  1. ruwfo Administrator

    Location:
    NJ
    Husqvarna Motorcycle:
    1980 390CR, 1982 430CR, 1984 400WR
    Other Motorcycles:
    1985 250XC, 2016 FJ-09
    Guys,
    I just bought a 83 250XC, & the bike's got what i think is an
    aftermarket clutch actuation arm, makes the clutch feel like butter.
    I believe it's because of this, it makes the clutch as good as a
    modern bike?

    Anyone see one like this? I can't believe how well the clutch action
    is :thumbsup: & that's with a so-so cable even.

    Husky John

    Attached Files:

    ruwfo, Feb 28, 2010
    #1

  2. MAG250 Husqvarna
    B Class

    Location:
    Houston TX
    Looks like a stock Husqvarna front brake actuation arm to me.
    MAG250, Feb 28, 2010
    #2

  3. Long Range Husqvarna
    B Class

    Location:
    Bakersfield California
    Looks like a front brake lever that has been adapted.
    Long Range, Feb 28, 2010
    #3

  4. NFG Husqvarna
    AA Class

    Location:
    Vancouver BC Canada
    That is slick. Might try that myself. Can you post better pic's and maybe put a ruler in the shot so I can get an idia what the mesurments are?
    NFG, Feb 28, 2010
    #4

  5. Up-tite Husqvarna
    Pro Class

    Location:
    Huntington Beach ,Ca.
    Just cut your stock one and add 10-15mm to it and weld it up. Later George
    Up-tite, Mar 2, 2010
    #5

  6. luvwoods Husqvarna
    AA Class

    Location:
    Zoar, Ohio
    Same thought here, especially after seeing the "pointer" on the end attached to the clutch shaft.
    luvwoods, Mar 3, 2010
    #6