1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

125-200cc Clutch case saver for CR/WR125

Discussion in '2 Stroke' started by MattR, Jan 8, 2010.

  1. MattR 2T Forum Clerk

    Location:
    Temperance, MI
    Husqvarna Motorcycle:
    WB165, SM610
    Other Motorcycles:
    Yamaha FZ1
    I been doing some searches and can not find any aftermarket clutch case savers for the CR/WR125 (2008+). There are some listed for the four stroke bikes. I doubt these will mount up though.

    Anyone using an aftermarket case savers?

    Here is an example of what I'm looking for:
    http://www.ziptyracing.com/products/product_detail.aspx?id=MTc4NA==
    MattR, Jan 8, 2010
    #1

  2. Fat Tire Flyer Husqvarna
    AA Class

    Location:
    Canada
    Fat Tire Flyer, Jan 8, 2010
    #2

  3. yanchocik Husqvarna
    AA Class

    Location:
    PA
    I designed one for the WR 250. I had one made which I put on my bike. It wouldnt take much to do one for the wr 125.

    I would like to get some made and sell to people interested, but to make it economical I need to sell at least 25 for each type. If people are interested I can do it.

    - Josh
    yanchocik, Jan 12, 2010
    #3

  4. yzracing Husqvarna
    B Class

    Location:
    israel
    case saver wr250 2009 2T

    hello
    i will be happy to get 2 for me and my friend
    yzracing, Jan 27, 2010
    #4

  5. pvduke Husqvarna
    Pro Class

    Location:
    ... on the gas...
    Husqvarna Motorcycle:
    tripple-hondo hoosk...
    Other Motorcycles:
    dozens of them, kicked to the curb
    pvduke, Jan 27, 2010
    #5

  6. yzracing Husqvarna
    B Class

    Location:
    israel
    case saver

    hello
    do you have the case saver for husky wr250 2T 2009
    i need 2
    yzracing, Feb 1, 2010
    #6

  7. yanchocik Husqvarna
    AA Class

    Location:
    PA
    Below is what I have designed / made for the WR 250.

    I do not have any right now, but if you were willing to wait I could have a batch made.

    Attached Files:

    yanchocik, Feb 1, 2010
    #7

  8. MattR 2T Forum Clerk

    Location:
    Temperance, MI
    Husqvarna Motorcycle:
    WB165, SM610
    Other Motorcycles:
    Yamaha FZ1
    Here is how my project turned out...

    I ended up making a custom case saver for my bike. I made a rough mockup using wood to check fit. Then, transfered the data points into 3D CAD. After a few different designs, I decided on a truss structure that protects the side of the clutch case and link arm (from rocks, side impacts, etc.). Then, I added extra thickness/width around the chain compared to the OE guard. It is very lightweight and made from aluminum. A friend of mine made it for me using a CNC milling machine based on my 3D CAD model. I'm happy with results. :cheers:

    Here is my 3D CAD model:

    [IMG]

    [IMG]

    Here is the final product:

    [IMG]

    [IMG]

    [IMG]
    MattR, Mar 26, 2010
    #8

  9. WoodsChick Administrator

    Location:
    Oakland, CA Miramonte, CA
    Husqvarna Motorcycle:
    3 Terras, 2 `07 SM610s, `09 WB165,
    Other Motorcycles:
    KTM, GasGas, Suzuki, Honda
    Wow...:eek: Nicely done, Matt! :notworthy:
    That is one beautiful hunk of moto-jewelry :thumbsup:

    I'll take one for my WR125, please :D



    WoodsChick
    WoodsChick, Mar 26, 2010
    #9