1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
    WR = 2st Enduro & CR = 2st Cross

125-200cc clutch chatter

Discussion in '2 Stroke' started by gordon lindsay, May 19, 2012.

  1. gordon lindsay Husqvarna
    B Class

    Husqvarna Motorcycle:
    wre 125
    Other Motorcycles:
    dtr 125
    As title says my clutch on my wre 125 is quite noisy until the clutch lever is pulled in then it goes away is this normal or will i need a new clutch thanks
  2. dirt-dude Husqvarna
    AA Class

    Location:
    Pa.
    If its when its in neutral it does it, its likely its the clutch push rod rattling inside the shaft. We've had an 04 thats done it since new
    and still working fine.
  3. gordon lindsay Husqvarna
    B Class

    Husqvarna Motorcycle:
    wre 125
    Other Motorcycles:
    dtr 125
    hi thanks for the reply yes that what mine is doing i,ve put wr friction plates now and ebc hd springs its helped alot but still doing it a little bit
    i think the fact the plates and springs were in need of replacing was causing alot of the noise