1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

250-500cc Clutch Hub Nut Torque

Discussion in '2 Stroke' started by Bill502, May 28, 2012.

  1. Bill502 Husqvarna
    AA Class

    Location:
    Upstate NY
    Husqvarna Motorcycle:
    2007 WR167 1978 CR250 1938 sw maus
    Other Motorcycles:
    1970 Triumph T100C 1973 Honda TL125
    Anybody happen to know the Torque for the Clutch hub Nut for a 2011 WR250 Going to put A Rekluse Pro on my friends bike tomorrow.
    Bill502, May 28, 2012
    #1

  2. Brian Scott Husqvarna
    AA Class

    Location:
    Bainbridge Island, Washington State
    Husqvarna Motorcycle:
    '11 WR 300
    Other Motorcycles:
    '01 CR 500R
    For a '11 wr300, the torque for a clutch hub nut is 21.7-23.9 ft-lbs. Not sure about the torque rating for the 250, but I can't imagine it would be much, if any, different than that for a 300. Don't forget the safety washer ;)
    Brian Scott, May 29, 2012
    #2

  3. Bill502 Husqvarna
    AA Class

    Location:
    Upstate NY
    Husqvarna Motorcycle:
    2007 WR167 1978 CR250 1938 sw maus
    Other Motorcycles:
    1970 Triumph T100C 1973 Honda TL125
    Thanks Brian, I found a manual in PDF and thats what it says.
    Bill
    Bill502, May 29, 2012
    #3