If you have a Magura clutch master, I highly recommend this lever. Fit , quality and function are top notch. A true 2 finger pull. http://www.midwestme.com/pages/product.html
I assume the "magura clutch lever" is used for all Husky's that have a magura rather than the "magura2 clutch lever".... I wasn't aware they changed at all- The red adjuster button is used off the stock lever and put on the new one? (not shown in their pic) Old school- can you confirm?
The red adjuster knob is not needed for this lever. Look closely at the pic and you will see a small setscrew on the backside of the plunger block. This screw sets the freeplay of the lever. When I first installed mine, the bike was creeping with the clutch engaged. Just turned the setscrew in and it was golden I didn't realize there was a change in '09 either. His pic of the Magura 2 lever is silver, perhaps it will be available in black also? I like this lever way better than my ASV shorty.
OK thanks- yea- I see that now- not that I change it often but I'd rather have a knob than need an allen wrench- no big deal though... Maybe Magura has a New model that requires a different lever maybe some KTM or OEM street model I don't even think about- but as for Husky's I have the same levers on my 09TE450 that were on my 02KTMEXC- "Magura levers..." and its the same one thats on the 05' te450, 08 and 10 TE 510's- just saying what I've verified... So whatever one you have should work for us- and you have the Magura Clutch Lever NOT the "magura 2 clutch lever"... when I break my Magura Shorty I'll look these guys up. Thanks for the tip
Right, pre '09 Magura lever. Actually put it on my 2005 Husaberg FS650. Already had ASV's on my Husky.
