1. 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     TE = 4st Enduro & TC = 4st Cross

Clutch Slave Cylinder

Discussion in '4 Stroke' started by Husky_Ant, Dec 12, 2009.

  1. Husky_Ant Husqvarna

    Location:
    UK
    Ooops! should have made the effort and swapped my chain and sprockets. Chain busted over a jump and took out the slave as well as breaking off the mouting lugs for the case saver, from the engine. :banghead:

    The price for a new one my side of the river is approx 500 of your dollars. :censored:

    How much are they in the states and where can I order one? I'm loathe to spend my money here at those prices. The last one I bought for a KTM over here was approx $90. Somethings wrong.

    I have a secondhand one with a broken circlip ring which will do as a temp fix but I'd prefer to fit a good one.

    And NO the chain wasn't to tight it was totally done and corroded from standing for a year.
    Husky_Ant, Dec 12, 2009
    #1

  2. Colo moto CH Sponsor

    Location:
    La Jara, Colorado
    Husqvarna Motorcycle:
    7602racing.com
    300 Quid for a slave cylinder! Somethings not right there. Last I checked stock ones were in the $160 USD range. Maybe try calling around to a few other husky dealers if you haven't already done so. If you do have to go stateside to find decent prices try Halls or GP cycles.

    http://www.halls-cycles.com/

    http://gpmotorcycles.com/
    Colo moto, Dec 12, 2009
    #2

  3. Ex HVUK Husqvarna
    AA Class

    Location:
    England
    Husqvarna Motorcycle:
    None
    I'm not sure what exchange rate you're using but UK retail price is £108.54 plus VAT. According to XE.com that makes it $176.46 plus tax in US terms...


    Dave
    Ex HVUK, Dec 12, 2009
    #3

  4. Joe Chod Husqvarna
    Pro Class

    Location:
    upstate NY
    Husky Ant,
    give Husky Sport a go at it. Sounds like a much better price for you.
    Joe Chod, Dec 14, 2009
    #4

  5. Husky_Ant Husqvarna

    Location:
    UK
    See Melvin.

    It was his quote.
    Husky_Ant, Dec 14, 2009
    #5