CNC program for 430 AE Clutchdrum

Is it possible to make a 430 AE drum with a program already made? Thanks.

Sure, but you would need a part file, material and a CNC machine at your disposal

Thanks Steve.
The same CNC program can work on every different CNC machine?

Thanks for the reply. I'm not keen on CNC Machine.

^^^^^ Nice!! I run a Haas VF3 with a trunnion

How do you think the originals were made?

Press and die or spinning lathe perhaps. Either way most likely work hardened in the process.

Why did they go to the spiral cut in the drum instead of the bronze shoes with diagonal slots?

5 axis work is fun. I’ve been in the trade for 7 years now. Currently I program, setup and run citizen l20x swiss machines. Make surgical robot parts. Pretty wild stuff. I also spent the first the three years doing 3/4/5 axis mill work and some wire edm stuff too.

It’d be best to come up with the process first whether it be milling, turning or both then program to the machine you have access too. There are an insane variety of machines out there with many different capacities. Your part may require a mill operation and a lathe operation depending on the limitations of the machines you have access to and the complexity of your parts. If milling, how do you intend to hold the part? Also what tooling do you intend to use? Material? What type of tolerances are acceptable? Is the part simple enough to write a program or would it be something to use cad/cam to generate code? A lot goes into it. Any pics of the part? Not very knowledgeable when it comes to the auto bikes.

Thanks for the answers.( W.Rozell's drum)
My friend is trying first to scan the drum.

Any further updates and what came of this? Any information on what machines this would be done or material you’d be using? Itd be awesome to see some machine work being done here on the cafe.

Monsieur Dufayard Husqvarna automatic riders on face book has the original blueprint in it's picture files it is downloadable. It would be a time saver if you have to write a new program