1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

All 2st cone size!

Discussion in '2 Stroke' started by shawbagga, Jan 27, 2012.

  1. shawbagga Husqvarna
    Pro Class

    Location:
    Eaton, Western Australia
    Husqvarna Motorcycle:
    None
    Other Motorcycles:
    2018 Gasgas XC250
    can anyone help me out im looking at replacing stock rubber bar cone inserts with steel ones. i know there spose to help out with vibration reduction but im sick of bars flexxing/twisting(run an under bar mount steering damper with raisers so get a bit of leverage through the bolts-annoys me i like everything tight!). anyone replaced the rubbers with steel or alloy? main thing i wanna know is the 2 diameters of the stock rubber cones & length of em?(need to check the taper size before ordering to make sure theyll fit!). cheers
    shawbagga, Jan 27, 2012
    #1

  2. MattR 2T Forum Clerk

    Location:
    Temperance, MI
    Husqvarna Motorcycle:
    WB165, SM610
    Other Motorcycles:
    Yamaha FZ1
    MattR, Jan 27, 2012
    #2

  3. shawbagga Husqvarna
    Pro Class

    Location:
    Eaton, Western Australia
    Husqvarna Motorcycle:
    None
    Other Motorcycles:
    2018 Gasgas XC250
    sorry 2010 wr300
    shawbagga, Jan 27, 2012
    #3

  4. shawbagga Husqvarna
    Pro Class

    Location:
    Eaton, Western Australia
    Husqvarna Motorcycle:
    None
    Other Motorcycles:
    2018 Gasgas XC250
    shawbagga, Jan 27, 2012
    #4