1. Husqvarna Motorcycles Made In Sweden - About 1988 and older

connecting rod kit identification..

Discussion in 'Vintage/Left Kickers' started by justintendo, Sep 9, 2015.

  1. justintendo klotz super techniplate junkie

    Location:
    mercer, pa/northwest pa
    Husqvarna Motorcycle:
    84 250,86 400,87 430,88 250,95 360
    Other Motorcycles:
    99 kawasaki zrx 1100
    i found an old rod kit covered in cosmo in my stash. appears to be unused, can anyone help id it?
    it measures 120mm center to center, 155mm overall length. the pin measures 25mm x 52mm..
    perhaps a 125 or 175?
    its in a box but i dont think the box is right. the part no. on box is 16-10-641-01, which is 66-71 250 i believe. this seems like it would be too short for that? thanks for any help!
    Photo755.jpg
    justintendo, Sep 9, 2015
    #1

  2. dartyppyt Husqvarna
    Pro Class

    Location:
    Illinois
    Husqvarna Motorcycle:
    17 TE 150, 82CR 500
    Other Motorcycles:
    82 125,250,430&500 79 390 83 250
    Hummmm did they use the H beam rods back then?
    dartyppyt, Sep 9, 2015
    #2

  3. jimspac Husqvarna
    Pro Class

    Location:
    Connecticut
    Husqvarna Motorcycle:
    82 250WR, 82 430WR, 84 250WR, 85 400
    Other Motorcycles:
    86 400WR, 82 Montesa Cota 349
    May be an early 125 rod (1972 was first 125 for Husqvarna)
    jimspac, Sep 11, 2015
    #3

  4. justintendo klotz super techniplate junkie

    Location:
    mercer, pa/northwest pa
    Husqvarna Motorcycle:
    84 250,86 400,87 430,88 250,95 360
    Other Motorcycles:
    99 kawasaki zrx 1100
    this is what i suspect, 120mm....
    justintendo, Sep 11, 2015
    #4