125-200cc CR-125 Jetting

Ok jetting guru's I contacted JD Jetting regarding my 2001 CR-125 to see if they had a jet kit for it. I was informed that a jetting kit from a 2000-2003 Honds CR-250 would work in my 2001 Husky CR-125 is that right or not? I am looking to make this bike run better since it is extremely rich down low. I am at between 1000 and 1500 feet above sea level and ride in North Dakota and Minnesota which can get humid in the summer.

I look forward to your replies

Mike

Ajax auto #1 plate D37 class Sen,,,,,,has run his 125 husky in the dez/mountains/glen helen etc with oem jetting , I saw his exhaust and it was gray and dry (optimum) with no gunk at glen helen. he said he has never opened the carb so I would say that if you go with 2007 model 125 jetting and find out what fuel/oil he uses you can not go wrong. R

but everything must be correct before jet play,,,,fresh top end, clean filter, good plug clean exhaust etc

It is possible that Ajaxautos dealer adjust the jetting. I know mine, Bills Motorcycle Plus, does.

I thought the same thing.