125-200cc cr125 bar mount

Any brand making adjustable bar mount or top triple clamp for cr125 2014?
Need to move bar forward.

Anyone?

check if turning the stock bar clamps 180 degrees will make a change in position

No, have checked that. But thanks for the tip.

Some of the factory japanese company's clamps are offset. Pro Taper and Renthal make universal offset clamps too. I have a set of the PT ones on my kx125 and they are pretty nice.

http://www.renthal.com/shop/mx-products/handlebars/bar-mounts

http://www.protaper.com/default/controls/handlebars/bar-mounts/universal-rubber-mounts.html

What bars do you have on the bike? You could go with a "flatter" bend with less sweep. The OE mounts on my 2014 TXC310 were reversible for different offsets. Not sure why the Cr125 would be different. Or, are you looking for more offset than what you could get with the OE mounts? I am 6'5" and run Renthal 996 bars with 49deg of sweep in a scotts mount, which is about the same offset as stock in the forward position.

They r reversible jus not massive difference

Yes, reversing the bar mount does move the bar forward. I changed mine on the 165 and added mini-hi bend bars for noticeable improvement. Enduro Engineering made nice mounts, 5/8" up and 5/8" forward (@ 16 mm) but no longer available for Husky.
https://shop.enduroeng.com/cgi-bin/commerce.cgi?preadd=action&key=23-602

Surely another brand crossover otherwise get independent clamps with forward offset

Here's another from Zeta: http://www.zeta-racing.com/clamps/bar_rise_offset/index.html