125-200cc cr125 vibration

is it normal to have vibration on foot pegs n handle bars am new to husky n 2 strokes all ways had 4strokes

I don't notice much - check all the engine bolts

2 bangers do tend to vibe a bit more than 4 strokes. But as rockdancer has mentioned check all the engine mount bolts, if everything is tight go hard !!! You will get used to it.

Compared to my 09 300 the 150 has NO vibration. Check all bolts, but I do not think mine has any.

Are you riding it really high in the RPMs? My nephew usually complains about his 65 vibrating a lot when he hasn't ridden for a while but when I ask his what gear he was in on the straight a way, he'll say "2nd" I tell him "once it's screamin' then shift buddy---the vibes will go down and you'll go faster"

how many hours are on your bike? if you have checked that everything is tight then it may be your main bearings. mine usually last between 40-50 hours

My 04 cr125 has nearly 200 hrs on it with the same main bearings and crank.

You can get handlebar inserts to deaden the vibration.

2strokes vib alot compared to a 4 stroke.
If theres nothing loose theres nothing to sweat.
When the vibs get to the point of discomfort,,,twist the throdle more and you wont notice.

Ditto to that ^^^^^^^^^^^^^^^^^


If mine vibrates, I never noticed it. And I ride in everything the New Jersey Pine Barons can throw at it.

I forgot to mention in my earlier post, do yourself a favour and pull off the magneto cover and give the flywheel a bit of tug up and down and backwards and forwards to see if there is any movement. If there is your main (crank) bearings are probably shot. This would probably feel like a deep rumbling vibration when the engine is running.