1. 2 Stroke Husqvarna Motorcycles Made In Austria - About 2014 & Newer
     TE = 2st Enduro & TC = 2st Cross

TE/TC CR150 Carb Settings

Discussion in '2st' started by Cheekywig, Oct 26, 2015.

  1. Cheekywig Husqvarna
    A Class

    Location:
    Norwich, England
    Husqvarna Motorcycle:
    CR125 2013
    Other Motorcycles:
    Triumph Street Triple
    Hi all, was wondering if anyone can help with the carb settings when upgrading to a 150 from a 125CR 2013 with a Pro-Circuit works pipe? thanks.
    Cheekywig, Oct 26, 2015
    #1

  2. 87husky500xc Husqvarna
    Pro Class

    Location:
    Dayton NV
    Husqvarna Motorcycle:
    2020 tx300i and a few vintage bikes
    Other Motorcycles:
    77 honda xr-75..
    There's probably a lot more info under the "Italy" section...Maybe....perhaps...
    87husky500xc, Nov 2, 2015
    #2

  3. Cheekywig Husqvarna
    A Class

    Location:
    Norwich, England
    Husqvarna Motorcycle:
    CR125 2013
    Other Motorcycles:
    Triumph Street Triple
    I'm after a little direction really now but my plug is of a very light tan in colour on the electrode however the strap over the top is even lighter and i cant decide if it is of a greyer or lighter brown colour. The jetting is standard and the needle clip is in the middle, would I be best to raise the needle or go one bigger on the main jet? any advice will be much appreciated, I added a picture... thanks. Lee.

    Attached Files:

    Cheekywig, Nov 8, 2015
    #3