1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

250-500cc Cr250 ign setup and lighting kit

Discussion in '2 Stroke' started by Pinittowinit, Mar 3, 2011.

  1. Pinittowinit Husqvarna
    AA Class

    Location:
    Kailua Hawaii
    I'm wondering if you can have the cr250 stator rewound so you can run the lighting kit.
    Pinittowinit, Mar 3, 2011
    #1

  2. ajaxauto Husqvarna
    Pro Class

    Can not say for sure about the 250 BUT on my 2008 CR 125 i had it rewound not it get 35 watts of power BUT when running a light when at a low rpm or idle the light just about goes out SO i mounted a batt in the air box to add the extra power at low rpm It now works great and i race night races with it got it rewound by Ricky Stator in san Diego cost about 100 dollars
    ajaxauto, Mar 3, 2011
    #2

  3. Pinittowinit Husqvarna
    AA Class

    Location:
    Kailua Hawaii
    That's what I figured. Ricky stator does good work. Did it affect performance at all? I put a high output stator on my buddies rm250 and it was a pain to start. Put the old one back ran no problem. Weird
    Pinittowinit, Mar 3, 2011
    #3