1. 4 Stroke Husqvarna Motorcycles Made In Austria - About 2014 & Newer
    FE = 4st Enduro & FC = 4st Cross

FE/FC Crappy KTM throttle cable ferrules

Discussion in '4st' started by ohmygewd, Apr 26, 2016.

  1. ohmygewd Husqvarna
    Pro Class

    Location:
    Melbourne, Australia
    Husqvarna Motorcycle:
    13'Berg FE350, 96'WR360, 01 WR250
    Other Motorcycles:
    Aprilia RSV1000
    On my second set of throttle cable for the 350 but after 1 hard stack and an innoxious fall, l've snapped these plastic ferrules again...is there a solution?

    I've used the alumi cable protector and they work some what but after a better solution - can you run the push/pull thottle upside down so that the vunerable part is under rather on top?
  2. robertaccio Husqvarna
    Pro Class

    Location:
    San Diego, Ca
    Husqvarna Motorcycle:
    2021 Husqvarna TE300i
    Other Motorcycles:
    99 HusqvarnaTE610, 94 Husaberg FC501
    Solution don't crash the way you are crashing............sorry I had too.
  3. ohmygewd Husqvarna
    Pro Class

    Location:
    Melbourne, Australia
    Husqvarna Motorcycle:
    13'Berg FE350, 96'WR360, 01 WR250
    Other Motorcycles:
    Aprilia RSV1000
    Can't help it Rob:thumbsup:
    robertaccio likes this.
  4. racemx904 Husqvarna
    Pro Class

    Location:
    owenton, ky
    Husqvarna Motorcycle:
    2014 Beta 350RR & 1986 430XC
    Other Motorcycles:
    1975 Rokon and 2004 Kawasaki KX65
    My uncle kept his cables in the rear handlebar then right on top to protect in falls....
    robertaccio likes this.
  5. Huskynoobee CH Sponsor ZipTy Racing

    Location:
    Castaic, CA
    Husqvarna Motorcycle:
    2011 TE449 2006 WR250
    Other Motorcycles:
    HDUltra Classic IT200 YZ250 SV650s
    Maybe it's time to try an aftermarket cable. Motion Pro or Terry Cable?
    ohmygewd likes this.
  6. robertaccio Husqvarna
    Pro Class

    Location:
    San Diego, Ca
    Husqvarna Motorcycle:
    2021 Husqvarna TE300i
    Other Motorcycles:
    99 HusqvarnaTE610, 94 Husaberg FC501