250-500cc Decals for 93 Husky 360 WR (aust)

Just picked up a 92 Build Husky 360 Ive been looking for a good one for quite a while, I reckon this one is spot on with a known History and only 2190 KM's.
The beast has got no decals and I want to get her back to her former glory so if anyone can point me in the right direction to get her looking back to stock that would be awsome. Im based in Sydney Australia and would prefer to shop local but if nothing comes up happy to go o/s to get what I need.
Ollie

Nice machine, would be tempted to grab a set if 02 plastics an put them on tank n subframe as 92 plastics are rare to find.
Im no help with graphics tho im sure someone else will chime in.

http://hva-factory.com/
Im sure he could point you in a direction for "vintage" graphics.

Thanks for the Links some amazing sites out there

ollie

That is a clean 1992 Husky! Looks like a great find. If nothing else, there many different size generic Husqvarna logo stickers/graphics on ebay. That could give you something to put on the rad shrouds at least. I remember reading about the '90s Husqvarna's in Dirt Rider/Dirt Bike magazines when they would have enduro bike "shootouts". Back then I was in middle school and riding a KX80 Big Wheel in the woods with a Dynoport pipe on it. Ah...the 1990's...

nice clean 92
had one in similar condition, was a great bike
i have a friend that had a 93 with the tank decals he had them made
ridereno is his contact here
if you look at my avatar that is his behind my bike and you can see the decals

what pipe is that
looks like UpTite

I would say stock husky pipe. The 1992s came with the silver pipe guards from the factory.

yeah its the standard pipe guards, I believe it is more to do with keeping the noise level down and not so much for protection The Decals that ridereno has on his bike are exactly what I am after.
PS this bike was built in 92 but is in fact the 93 model.

is the kickstand mounted to the swingarm or the frame

Frame on a beefy tab it should be

bolt hole a little off but best i can think of

https://www.dcvmx.com/xcart/product.php?productid=19685&cat=351&page=1

G'day Ollie, if you want OEM graphics for that model find a good pic of the 92/03 graphics and take them and the shrouds, in fact the whole plastics, to a mx graphics joint near you and would recommend in NSW:
Holeshot Graphics
Teencee Graphics

It can be expensive (from $100-400) as it will be all custom and they will require the plastics for fitment. The plus side is that you can use the sticker backing as templates down the track if you want to create a different graphics set - seeing it's a 92/93, it's just the big husky H with yellowish halo on the side?

the first 360 that can accept 02 plastics is a 95
92, 93 and 94 have a different main frame or for sure tank mounting position
i parked the 99 and 93 took off the tanks then did some measuring
subframes interchange though

a quick doll up is to add yellow
the front is a 2000-? fender, the rear is a 98-99

The Kick stand is frame mounted

Thanks mate good info there,have used Tee n Cee previously.

Thanks Joe ! might ask if he has the anything for the 360 (but dont really want the DC logo )

Ollie

looking at the first picture of your bike it has a 92 style swingarm, square vs. the 93 rounded edges, look ay my swingarm and you will see what i mean, so that is where the questions came from

i have the OEM ones from mine and how can i get the info that someone needs to reproduce them
do graphics shops map them or???? i really don't have a clue how they do it
mine are the originals so they should be a good representation to copy if nothing else

Whoops just went down to my garage and had a look at the swing arm, the kick stand is indeed mounted to the swing arm not the frame,my bad

Im not sure of how they do it either, I am guessing they have some sort of scanner, be good to get a copy of your graphics if possible

Ollie

i am on the road working
next time home i will dig them out
then,,,, as i said this is gray to me, do what

I reckon if you could take some high def close ups that would be awsome, I am going to have 6 months of being stuck on a ship so might have some time to play with adobe photoshop or similar. I will PM you my email
Here is the left side of the WR showing the side stand

and this is the exhaust spigot is this the newer pipe ? or the unobtainable one