After thinking about it for a while based on input from the thread in the 2 stroke section http://www.cafehusky.com/threads/wanted-clutch-cover.79105/ I decided it would be a good idea to move some of the discussion over here. We have begun discontinuing many of our products for the Italian Husky's. We may have begun phasing out some of these parts a little prematurely. It seems there is still some interest in the WR 250/300 clutch covers with oil windows. So I'm starting this thread to gauge interest and see if we should do another run covers. We will need at least 20 people interested to do another run. If you are interested in a cover please add your name below. We will make them in black, red or bare aluminum if desired. If/when there are 20 or more interested we will take a deposit and produce another run of covers. I think we'll give this another week or 2 and make a decision. I'm not going to keep this open indefinitely because some peeps that are interested now likely won't be interested in 6 months or more. As of 04/23/2015 19 total. huskyjim 2 black eurocycle01 1 black 1 red hesutton 1 red firecrotch 1 black gary alger 1 black mxrider323 1 red erikV 1 mikebru 1 black NCSteve 1 black WV dag 1 red PaulD 1 red schrup 1 Huskylux 1 black David Howell 1 KX3089 1 hammers 1 red 24valvecummins 1 black
20 people for a 2-stroke and 20 people for 4 stroke cover or 20 people all together for a 2 or 4 stroke covers? Count me in for two (2) 2-stroke covers in Black Please!
I'm interested in one black and one red 2-stroke clutch cover. Let us know when you want the deposit money. Thanks
Edited my original post to exclude the 4 stroke covers from this thread. I will start up a separate thread for those if needed.
We have 1 black ignition cover and 7 red covers in stock right now. I was originally planning on discontinuing the ignition covers also, but with the renewed interest in the clutch covers we may or may not make another run. We might do something similar to this where we get a minimum amount to do another run.
I'll (Mike B) take a black clutch cover for an 09 wr250. I have a question, though. Previous owner installed a rekluse z-start pro. The bike has the stock Husky clutch cover, not a Rekluse cover. Will the 7602 cover fit over the Rekluse? Thanks.
The red ignition covers are in stock right now. At the moment we have no plans to make another run of ignition covers.
