1. Husqvarna Motorcycles Made In Sweden - About 1988 and older

DLS brake ajustment

Discussion in 'Vintage/Left Kickers' started by Northern Husky, May 5, 2010.

  1. Northern Husky Husqvarna
    AA Class

    Location:
    Canada
    Hello All,
    lve fitted front DLS brakes/forks on my bike, with new pads. lve found myself about an inch of 'inner' cable short.
    How do i free up some slack? For example on the rear drum brake you can move the actuator arm around on the splined shaft, is there a similer ajustment for the front?

    Cheers
    Northern Husky, May 5, 2010
    #1

  2. crankpin Husqvarna
    B Class

    Location:
    England
    Cut some outer cale away, or buy the correct cable
    crankpin, May 7, 2010
    #2

  3. Northern Husky Husqvarna
    AA Class

    Location:
    Canada
    Yep crank, im with you mate, you can usually wiggle of the brass cap at one end or the other, and take off the outer skin with a small disc on a dremill, lve had to do this on snowmobiles when using cable extentions....................not a "Monday morning " Job :cheers:
    & Thanks for the imput.
    Northern Husky, May 8, 2010
    #3