1. Husqvarna Motorcycles Made In Sweden - About 1988 and older

does anyone have a schematic on 85 brembo brake caliper

Discussion in 'Vintage/Left Kickers' started by Dave Mills, Apr 24, 2011.

  1. Dave Mills Husqvarna
    AA Class

    I wanted to check the pads, was in a hurry and started loosening the allen bolts on the caliper[IMG]. When I realized you just had to knock out the pin, I tightened the bolts. Now I have brake fluid leaking from the mating surfaces. What do I do?
    Dave Mills, Apr 24, 2011
    #1

  2. buzuki Husqvarna
    AA Class

    Location:
    sydney, australia
    Husqvarna Motorcycle:
    WR300 '09
    Other Motorcycles:
    KDX200,KX125,CR250,50cc quad,
    probably find there is 2 seals between the halves of the caliper. sounds like one of those is leaking or if you undone the bolts far enough the seal may have fallen out of place and is probably now stuffed cause you've tighened it back up.

    Just buy a new seal kit, anyone should be able to fit them quite easily.
    buzuki, Apr 24, 2011
    #2

  3. Dave Mills Husqvarna
    AA Class

    Thanks, fixed was missing a oring
    Dave Mills, Apr 25, 2011
    #3