early 80's Husky Footpeg options

I know about the custom IMS units that are available exclusively through the one husky parts guy.
but curious is anyone else has had luck with adapting, cross over of modern pegs (fast way?) to the Huskies.

I get my ride tomorrow from Montana and am going to start bolting things on!

HR

:usa:

I asked the same question not to long ago and ended up modding my frame, and putting on some from a 05 YZ250 now the options are endless...

Nicely done!
nice tight welds...your smooth...
MIG?

HR

:usa:

Hi Mattskn,
Do you have any updated photo's? Any additional advice on mounting modern footpegs on a 1984 Husqvarna.

Thanks
Terry

Ill get out there in the morning and get a few pics posted for you

Maico Only had Husky footpegs for a while. Will see if he still sells the Monday.

IMS Husqvarna Vintage footpegs

I have found a photo of the IMS Vintage footpegs and the website address is
http://www.huskyjunk.com/ims-foot-pegs.htm
Thanks and enjoy
Terry

Here are a couple pics of my Mod YZ aluminum frame 05-10 pegs and brackets. I made the mouning plate out of 1/4 inch plate and they are about a inch farther forward than the stock location. Havent rode the bike yet so cant tell you how it feels yet

Great Job updating footpegs

Fantastic job, I appreciate the extra photo’s. I have now decided this is the way that I will modify my Husqvarna. My motto is I don’t need to be a fabricator / welder. I just have to know one

Thanks again for your help
Terry

I did all the mochup and my good friend did all the welding, I wouldn't want to stand on my weld..All in all it was a fairly easy job..

For all,
Those IMS pegs didn't mount up correctly on my scoot. 81' 430. No provision for return spring and if I remember correctly they didn't seat correctly on frame. I was told by seller ".....just heat and bend and cut the springs, drill some new holes and they "SHOULD" mount up......". For $135.00 I want something that will mount up w/out modification. Plus after you do all that (cutting/heating/bending/drilling) and they still don't fit - non returnable b/c they been modified. My 2-cents worth.

I made the same error last year as Schim but have been running them just the same. Now the frame mounting holes are warbled out, considering drilling out to use M10 bolt