EFI/ electrical issues - 2007 sm610 ie

Discussion in 'EFI/carb' started by JSYDAN, Sep 26, 2014.

  1. JSYDAN Husqvarna

    Husqvarna Motorcycle:
    2007 SM610ie
    Other Motorcycles:
    Too many
    Hey guys -

    I apologise if this has been asked before but I have looked and looked and can't find it.

    Just had cam chain done and all was fine when I picked up, started first time etc. rode home, stuck her in the garage. 2 days later when I turn the key all lights come etc as usual, but no noise from the pump (usually hear it prime) - then when the lights go off I lose the neutral light too. Unfortunately, I have had similar issues before, which turned out to be dodgy wires under the head light - however this is not the problem now - have checked fuse for EFI ( right hand side, under seat 15amp - that is the one right?) and all good - anyone got any ideas?

    Any help/ idea much appreciated and sorry again if already asked

    Cheers,

    Dan
  2. JSYDAN Husqvarna

    Husqvarna Motorcycle:
    2007 SM610ie
    Other Motorcycles:
    Too many
    Should also add nothing coming from the starter either.

    Cheers

    Dan