Electical retro fiting to 510

Im looking to fit custom lights and aftermarket (cheaper) radiator fan myself. Is there a guide on how to wire these items up yourself?

Don't know about the fan but you can find electrical wiring charts on the net somewhere.

Yeah just thought this place would be best to start for Husky specific stuff.
When/if I find one will add link.

What year model bike have you got?

just fitted one at the weekend... 20 dollar fan (yes its cheap ) ..couple of lengths of wire, waterproof switch and some fork spades for battery.. cable tied fan onto the back of my rad(rhs onto force rad guards)... wired from posi terminal along frame up to bars onto switch terminal and other terminal down to power feed wire on fan. negative along frame to earth wire from fan...done !... had had a bath in forest mud holes and survived my power washer so all good so far.. my bike is an o5 bike and the newer bikes have smaller tank and cut out for the larger factory fan to mount...no space for it on my bike so had to improvise.. looks ok and all wiring neat and tidy out of the way... pretty basic stuff... i suppose i could fit a temp switch but never bothered... probably will st some point ! one of those inline/inside hose T piece type which will be more costly than all of the rest !

Thats sounds prett straight forward rab. I guess as long as I remember to turn it off there shouldnt be any problems running the battery flat.


Marky I have the 2009 model.

thats why i may fit a thermo switch too... but once the engine is off, the fan is audible.. or a switch with a light in it etc.. loads of wee things you can do but an 09 should have a fan as stock ?? my mates 08 and 09 both have fuel injection and smaller tank where the fan sits under ?

Does anyone know if the 09's use the same headlight lens as the previous years?