Engine Oil Light

Discussion in '610/630' started by Katabolism, Aug 20, 2009.

  1. Katabolism Husqvarna
    AA Class

    Location:
    Adelaide
    Excuse the dumb question here please :)

    I have an 06 610SM, and it has about 7300kms on it now, and loving every minute of it :)

    The engine oil replacement light came on today, now according to the manual this is only after the first 1000kms or so.

    Is this just a normal thing to come on every now and again to advise you to change the oil, or should it only come on that first time ?

    And is there a problem with it coming on again ?

    Cheers
    Chris
  2. PALMER84ONE Husqvarna
    AA Class

    Location:
    Silverado, CA.
    Husqvarna Motorcycle:
    08 TE450 THE ROCKET
    Other Motorcycles:
    12 RS520, CRF150F/230F, YZ250
    Should have a reset and you can set it up to come on later or sooner if I am not mistaken.
  3. BikeSDP Husqvarna
    AA Class

    Location:
    Longmont, Colorado
    Husqvarna Motorcycle:
    None @ moment
    Other Motorcycles:
    990 Adv, Multistrada 1200, 500 EXC
    I believe the default is after every 30 hours of running, the oil can is displayed on the LCD. About 15 miles from home one day, I saw the oil can on the display. I thought I had just lost oil pressure, but later learned it was just a friendly reminder. I pulled over, checked oil level, checked for leaks, etc. I was pretty sure it was only a reminder, but imagine the cost of being wrong. I should have read that damn owner's manual. Instructions can be found here.
  4. Katabolism Husqvarna
    AA Class

    Location:
    Adelaide
    Thanks for that.

    Yeah i had a check of it when i got home, levels are all fine and looks good, glad it was just a reminder and nothing else, would not like to figure the cost if something went wrong.

    Will just reset it and wait for it to pop up again.

    Thanks again :)