125-200cc excessive throttle play solutions

On my 04 cr125 its had excessive play at the throttle since ive owned it, stock carb, lectron, and now, keihn no differenxe,

Its maxed out at the adjustment on the bars, any other ways to take the slack out? I hate it as switching from bikes without slack to mine results in relearning throttle control every time basically.

Do i need a new cable is it just worn out?

Check your throttle tube you may have two positions for the cable to sit in put it on the furthest one and see if that makes a difference.

Failing that if your cables free moving you can get a cable repair kit that has nipples with it simply cut your existing one off and thread a new one further down to take out the slack.
Not happy doing that yes get a new cable .

pretty much all carbs have an adjustment aat the top of the carb as well...you may also have the wrong cable?

I'll take a look at the carb tomorrow see what i come up with, also will check out the throttle tube, thanks for both tips. Never had a sloppy throttle before!

When I put the Lectron on my WR250 I had to take all the adjustment at the carb and at the cable to get the slack out (stock cable). I ordered a custom Motion Pro cable from Kevin at Lectron that got the adjustment back to centered.

a very small amount is key for throttle control but too much is very very annoying....some just dont care tho. some motion pro throttle have an adjuster mid-cable.

put the mikuni back on and prepare to be impressed

The mik was just on like 3 weeks ago, and i had play.

Buy the Motion Pro for the Lectron and be done with it.

lectron has it for sale on their site if you want to be sure the cable is right

let me start by saying my throttle worked fine stock
when i replaced the Mic on my 99 the Lectron came with a cable
it was for who knows what, definitely not my bike
i took the stock cable to task due to a ride the next day
i had to take all the slack out of the cable to make the Lectron slide go all the way down
you need to look at your cable if you had slack with all the carbs

For my 250sx it was recommended to me to buy a new cable for lectron as well, I think it is just a motion pro +4 cable.

If you really want to improve throttle slop and response i recommend the G2 2-stroke quick turn throttle. You can change cams from a wide selection if you dont want it to be a quicker turn, they make stock cams and even cams that take more rotation to turn full throttle. One of my more favorite upgrades ive done.

http://www.g2ergo.com/store/2-stroke-quick-turn-system/