125-200cc exhaust

Just put a husky track pipe on my m8s wre125. Any idear on jetting its runing a dellorto 28mm carb and we are keeping the dellorto .it had a exhaust that was restricted

No idea on that type of bike . Please try to be more specific in the title .

M8s = mates. WRE(and SM) is somewhat de-tuned / street-legal version of the WR. I guess it was the A1 restricted (11kw) pipe whereas unrestricted is like 25-30hp.

I found this from one of the biggest finnish 50-125cc bike sites:

Main jet: 165-175
Idle jet: 34
Slide: 50
Needle: d50
Last one: 270 (cant translate)

In general, to benefit from more/better exhaust flow you need more air and more fuel, so open up the airbox if necessary and richen the carb. Some details would help. If it was running well before and now it's hard to start, it's probably lean or flooded. Check the plug and buy a new plug or 2 if you're having problems.
no pics=it didn't happen

would that be a 36mm or 38mm carb
a bit small at 26mm

Its 28mm like it says not 26mm

You look in general to a higher nr of main jet

there might also a richer needle needed in the set up

pipe manufacturer could give you probably a ballpark nr of where you have to look at

what type of pipe do you have?

As stated husky track pipe made by husqvarna .ther sold to deristrict basicaly a hollow exhaust.

yer 26mm would be a bit small good job it has the carb thay came on bike when new a dellorto 28mm hey

not hard to start exhaust is not on bike yet till we have a idear of jet size needef

thank you and yer its the restricted pipe runing 14o main jet .so i guess after reading your post 16o plus jet needed .big help thanks

Could you give me the info for the web site plz so i can look thanks

^ this bloke been smoking the glass barby or what?!!