1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

125-200cc Fastways and the new 125 frame

Discussion in '2 Stroke' started by NWRider, Jul 13, 2010.

  1. NWRider Husqvarna
    AA Class

    If you have one of the the 125s don't bother trying to put Fastways on in the low position. The right one is a major pain to get mounted and once it is one it can barely swing before hitting the rear brake mounting bolt. It seems to work OK in the tall position though.
    NWRider, Jul 13, 2010
    #1

  2. Motosportz CH Sponsor

    Location:
    Vancouver WA
    Husqvarna Motorcycle:
    2021 TE250i, 570 Berg, 500 KTM, 790R
    Other Motorcycles:
    many
    Also if you do not make some way for it to stop before hitting the brake arm if you crash on the right side it can swing up and break the entire rear brake lever bracket off the frame. Ask me how I know. :banghead:
    Motosportz, Jul 13, 2010
    #2

  3. NWRider Husqvarna
    AA Class

    I had a blob welded on the stop to fix that problem. But it is not big enough to work on the new frame now. :banghead:

    I may not worry abou it as the peg contacts the brake bolt and the brake lever very close to the bolt. It looks like less of a problem then it was on the older bike.
    NWRider, Jul 13, 2010
    #3

  4. MURPHMONSTER Husqvarna
    C Class

    Location:
    Appleton,NY
    What are FASTWAYS??
    MURPHMONSTER, Jul 13, 2010
    #4

  5. Motosportz CH Sponsor

    Location:
    Vancouver WA
    Husqvarna Motorcycle:
    2021 TE250i, 570 Berg, 500 KTM, 790R
    Other Motorcycles:
    many
    Big fat footpegs that I got to redesign when I worked there.

    [IMG]
    Motosportz, Jul 13, 2010
    #5

  6. BikeSDP Husqvarna
    AA Class

    Location:
    Longmont, Colorado
    Husqvarna Motorcycle:
    None @ moment
    Other Motorcycles:
    990 Adv, Multistrada 1200, 500 EXC
    Not to hijack, but my 300 with Fastways sometimes manages to snag the kickstart lever
    BikeSDP, Jul 13, 2010
    #6

  7. Craigl Husqvarna
    AA Class

    Location:
    NJ

    Attached Files:

    Craigl, Jul 13, 2010
    #7

  8. Motosportz CH Sponsor

    Location:
    Vancouver WA
    Husqvarna Motorcycle:
    2021 TE250i, 570 Berg, 500 KTM, 790R
    Other Motorcycles:
    many
    Nice solution. FYI for welding, they are 17-4 investment cast stainless (well supposed to be).
    Motosportz, Jul 13, 2010
    #8

  9. NWRider Husqvarna
    AA Class

    I discovered that in the high position the left side hits the pin that holds the kick stand spring. I guess I will be running stock pegs on this bike for now.
    NWRider, Jul 15, 2010
    #9