1. 4 Stroke Husqvarna Motorcycles Made In Austria - About 2014 & Newer
     FE = 4st Enduro & FC = 4st Cross

FE/FC FE 350 rear brake lever

Discussion in '4st' started by mhgregor, Mar 1, 2016.

  1. mhgregor Husqvarna
    A Class

    Husqvarna Motorcycle:
    2016 FE 350
    Other Motorcycles:
    Honda VFR 800 Fi-W 1998
    Hi,

    I want to try and get my rear brake lever further back to have better control.

    Other than buying a completely new lever, does anyone have any experience with either Fastway or 7602 Racing adjustable brake pedal tips?

    I can't seem to get either in the UK anyway, so will have to order from the US.

    Does anyone have any recommendations on complete adjustable rear brake lever sets for the FE 350 too? I've seen the Hammerhead models but didn't fancy the expense and the stock item is fine, it's just the tip that is too far away.

    Any advice appreciated.
    mhgregor, Mar 1, 2016
    #1

  2. mhgregor Husqvarna
    A Class

    Husqvarna Motorcycle:
    2016 FE 350
    Other Motorcycles:
    Honda VFR 800 Fi-W 1998
    mhgregor, Mar 1, 2016
    #2

  3. RussellFC250 Husqvarna

    Husqvarna Motorcycle:
    2015 Husqvarna FC 250
    Tusk makes a real nice full lever for cheap... I have the scotts one which is the same.. the tip is on a pivot too..
    RussellFC250, Mar 8, 2016
    #3

  4. JonXX Administrator

    Location:
    Bill's Motorcycles Plus
    Husqvarna Motorcycle:
    360CR 360WR SM610 TC450 TXC250 TC250
    Other Motorcycles:
    Hondas, Harleys, Yammys & a squid
    I have the 7602 brake pedal on my TC250, but for the opposite reason, I wanted it farther away from the footpeg. I like the tall sharp teeth on it too, the red clay mud here is no match for it.
    JonXX, Mar 8, 2016
    #4
    mhgregor likes this.