I have a 09 te510 and I was just wondering what kind of elimination ideas you guys have for your bikes for the long, stock, bulky taillight and license plate holder that is on there. I recently purchased from Dennis Kirk the UFO taillight that they have on their. And it comes with just the red, black and yellow wires. I figured that it would be an easy splice and it would fire right up, I was totally wrong. The stock taillight assembly has no black at all, and also the wires from the blinkers are spliced into the wiring harness from the bike. I have never seen anything like this, I recently just wired a sicass fender to my buddies 500exc and it was one of the most simplistic wiring diagrams I have ever done. Any help would be greatly appreciated. I can post pictures if really necessary.
Don't know if it is the same, but the ground for the lighting on my '12 TE310 is dark blue. Red is right, and light blue is left, and I believe yellow is hot for the taillight.
Yeah ill have to check and see on that. I'll take a volt meter to it and hopefully I can figure it out. I've just never seen a wiring diagram like it. Pretty weird, appreciate your input.
