TE/TC fender rubbing frame

anyone else have their front fender rubbing the frame when you turn?? It started today and by the time I got home has scuffed my fender and frame pretty good? when the wheel is straight it has zero clearance from the back of the fender to the frame.

Yep mine certainly does. The clearance is super tight and if there is any kind of mud/dirt built up it rubs.

Well that seems like a major flaw. Soon mine will have the paint all the way gone.

what bike?

The 14 TE300...same bike were talking jetting on your thread

i will go and have a look at mine, have not noticed anything, but will go have a look.

I thought that was a standard feature on all dirt bikes. All my stuff does that...

Well I have been riding 10 years and I have never felt ia bike catch the way this one does

Yep looks like my TE300 does it too

Shouldn't be that way, quick fix put a washer between fender and triple clamp.

or maybe a little heat gun/hairdrier to the top rear area then over bend it down until it springs back with clearance. plastic works easily. perhap your fender was buried in the pile in a bad position and got flexed out/opened up.

I'm going to try the washers then a heat gun. Let ya know how it works. Mine is much worse then the photo.

washers on the back two bolts sorted the problem.