1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

250-500cc ferracci piston

Discussion in '2 Stroke' started by bulto, Feb 13, 2015.

  1. bulto Husqvarna
    AA Class

    Husqvarna Motorcycle:
    2002 cr 250
    Other Motorcycles:
    ktm maico honda
    Does anybody know how a fbf weisco piston compares to stock as far as replacement interval. Thinking about going to stock on cr 250. thanks.
    bulto, Feb 13, 2015
    #1

  2. bulto Husqvarna
    AA Class

    Husqvarna Motorcycle:
    2002 cr 250
    Other Motorcycles:
    ktm maico honda
    Ok ,does anyone run a wiesco piston in any of there bikes? Run as long as stock?
    bulto, Feb 16, 2015
    #2

  3. justintendo klotz super techniplate junkie

    Location:
    mercer, pa/northwest pa
    Husqvarna Motorcycle:
    84 250,86 400,87 430,88 250,95 360
    Other Motorcycles:
    99 kawasaki zrx 1100
    i prefer wossner myself, with any brand run till compression starts to drop..or ring gap grows beyong spec.
    justintendo, Feb 16, 2015
    #3

  4. Motosportz CH Sponsor

    Location:
    Vancouver WA
    Husqvarna Motorcycle:
    2021 TE250i, 570 Berg, 500 KTM, 790R
    Other Motorcycles:
    many
    Running a wiseco in my 02 CR250, zero issues. I've run piles of Wiseco's with no issues.
    Motosportz, Feb 16, 2015
    #4

  5. justintendo klotz super techniplate junkie

    Location:
    mercer, pa/northwest pa
    Husqvarna Motorcycle:
    84 250,86 400,87 430,88 250,95 360
    Other Motorcycles:
    99 kawasaki zrx 1100
    any new piston is better than used one needing replaced
    justintendo, Feb 16, 2015
    #5

  6. bulto Husqvarna
    AA Class

    Husqvarna Motorcycle:
    2002 cr 250
    Other Motorcycles:
    ktm maico honda
    just wasn't sure about quality compared to stock. thanks.
    bulto, Feb 17, 2015
    #6

  7. troy deck Husqvarna
    Pro Class

    Location:
    Republic MO
    Husqvarna Motorcycle:
    87 250wr 12 cr125
    Other Motorcycles:
    kx65 ty80 rm80 kdx250
    don't thing you'll have much choice but wiseco or wossner Eric Gorr should have a 2mm over wiseco[265cc] BRAAAAP :thumbsup:
    troy deck, Feb 17, 2015
    #7

  8. bigriver Husqvarna
    AA Class

    Location:
    Salem
    The Wiseco piston will be just a little lighter. I weighed them before my last rebuild on my 2011 wr250.
    bigriver, Feb 17, 2015
    #8

  9. bulto Husqvarna
    AA Class

    Husqvarna Motorcycle:
    2002 cr 250
    Other Motorcycles:
    ktm maico honda
    Thanks for the info.
    bulto, Feb 18, 2015
    #9