1. 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
    TE = 4st Enduro & TC = 4st Cross

Final Answer about pick-up coil

Discussion in '4 Stroke' started by riccardo, Oct 8, 2021.

  1. riccardo Husqvarna

    Husqvarna Motorcycle:
    hsq 510 2010
    Other Motorcycles:
    none
    Hi to everyone, I want to share with you what I found out about the pick-up coil... I've searched around various forums, and contacted a few sellers.

    This item should works for each Smr/Te model (04-07-08-09-10), but I suggest you to check the correct value on your workshop manual. (it should be 100 ohm +- 15%).

    There are 3 options:
    -buy the original part
    -buy a replice
    -buy a new(or used) stator


    Here, there is the label with different pick-up coils:
    [IMG]

    The P01 is the correct one.
    As you can see on the site, this part is used for a lot of KTM models... so I've checked the exploded drawings of 3/4 different bikes, and the spare part was the same.
    So if you want an original part because you don't trust replica, the part number is: 59039034000

    I bought it for 74€ (in italy... maybe the costs are different in other countries).
    [IMG][IMG][IMG]


    But if you don't care about original part, in order to save some money, there are two well know resellers:

    - horse power ignition (https://www.hpi.be/pickup.php "P01")
    -regulator rectifier (Pickup Coil SMR510 Husqvarna (regulatorrectifier.com) I've red some bad reviews, but nothing serious)

    "horse power ignitionis" is situated in Belgium, so convenient for europeans (but if i remember well, somewhere is written "shipping all over the word" or something similar) .

    While "regulator rectifier" is situated in US.


    So, I hope this can be useful for someone, and if anyone wants to share any info about TC-TX models, it is welcome.

    ps: probably there are a lot of mistakes or syntax errors

    Attached Files:

    rancher1 and Dirtdame like this.