Fitting JD Tuner to handlebars question.

Anyone fitted a JD Tuner to handlebar mount.Thinking of fitting mine but is the cable long enough.

The cable it comes with is long enough, but a lot of people shorten it up to stuff it under the seat.

I believe it's long enough and it's a good way to dial it in while riding. I think the under seat possition is better for the long term. It's a durable unit, but exposure to the weather over time might not be the best for it and once set right you'll rarely readjust it. JM$.02

I started off having my JD Tuner under the saddle.
The novelty of dismounting and removing the seat everytime to tune quickly wore off.

I now have had the JD's on the Handle Bar Mount on all 3 of my scoots for nearly two years now.
Very convenient for Tuning and would not have it any other way.
No problems with cables or fitment etc.

I your bike is regularly exposed to the harsh elements you may want to consider some form of protective skining.

On my 449, my 630 is the same:

where did you get the plate from buddy

Looks like a HDB handguard/top clamp setup.

i am in the process in making something cheap and cheerful without having to modify anything.If it works i will put up some piccys.So far cost me £2.49

ideally i would like to enclose it in something,but until i see something that clicks and is cheap i will leave it exposed

Cheap Pelican/Plano clear Ipod case, with the wire run through a grommet in the side?

HDB like was already posted, there are 3 different top plate styles and the one I have on the 630 is a different style (along with the 1.5" risers from HDB):