fix for fork guard rub that isn't crapy looking

Discussion in 'Common Items on Husqvarnas: Tires/tubes/grips/etc' started by bdl507, May 13, 2013.

  1. bdl507 Husqvarna
    AA Class

    Location:
    New Hampshire
    Husqvarna Motorcycle:
    99 wr360
    Other Motorcycles:
    rd350 dr650 tt500 pe250 hondas lots
    I cleaned forks with brake clean then cut up strips of slap stix its thick clear stick on repair patch so that it covered part of fork just above wear ring wrapped it around so it butted up against its self. I have 1.5 hrs of hard riding and it is bearly scratched and I have wrap around ktm guards that rub on the farks pretty good but now isn't hurting them. It is a patch kit for old top load washers when the inner tub slaps against the outer tub and cuts a groove in it. I was told it is indestructable and it seems to be so far.
    20130426_201049.jpg 20130426_201227.jpg
  2. 268fords Husqvarna
    Pro Class

    Location:
    Powell, Wyoming
    Husqvarna Motorcycle:
    08' TE510'
    Other Motorcycles:
    Honda CRF 100, Kawasaki KLX 110
    Where can you purchase this at?
  3. dukepilot Viva l'Husqvarna d'Italia!

    Location:
    Morgan Hill, CA
    Husqvarna Motorcycle:
    450 SMR, TE250, CR125, SM610
    Other Motorcycles:
    Duc, Buell, Honda
  4. 268fords Husqvarna
    Pro Class

    Location:
    Powell, Wyoming
    Husqvarna Motorcycle:
    08' TE510'
    Other Motorcycles:
    Honda CRF 100, Kawasaki KLX 110
  5. R_Little Husqvarna
    Pro Class

    Location:
    NJ
    I've been using Shoe Goo and a big ZipTY....it looks like crap but works.

    Maybe I'll get some of this.