1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

125-200cc Float Height

Discussion in '2 Stroke' started by 72racerx, Mar 31, 2013.

  1. 72racerx Husqvarna
    AA Class

    Location:
    Melbourne, Australia
    Husqvarna Motorcycle:
    13 WR144
    Other Motorcycles:
    01 VFR800
    G'day All !! Can someone please kindly tell me what the standard float height is suppose to be on the TMXX carbs. I seem to be getting a different idle speed depending if it is standing upright or on the side stand.
    72racerx, Mar 31, 2013
    #1

  2. sabortooth No Class

    Location:
    Izard Co. Arkansas
    Husqvarna Motorcycle:
    11uptite167
    Lower till it stops overflowing, then just a little more. 5 or 6mm.
    sabortooth, Mar 31, 2013
    #2

  3. Vinduro Husqvarna
    Pro Class

    Location:
    Mississippi
    8mm is what I have hear is the best and is what is set on my former 2011 WR167. Much higher and you will get a bog when hitting bumps and poor fuel economy from fuel spillage out the overflow.
    Vinduro, Mar 31, 2013
    #3