125-200cc Flywheel Magneto Puller Needed

WR 125 2009. Do I need a Husky puller, or are other pullers usable?

As long as they are the same size and thread direction. Get a two piece one with bolt that pushes in as they work better

I may have not explained myself well. What puller do I need and will this work:
Clicky: http://www.ebay.co.uk/itm/MAGNETO-F...t=Motors_Automotive_Tools&hash=item2eb2d3c5e1

I would watch urself there as my flywheel did not hav a thread to insert the 27mm x 1.25 thread puller I have one but my flywheel has 3 m8 holes criss cross from the flywheel nut I made my own by using 3 x m8 x 50mm bolts and 3 x m8 nuts and a slab off alloy measured the holes with a ruler on the flywheel and job more or less done,does urs hav a 27mm x 1.25 thread? in the middle?

sorry I shall re-phrase that,,,,,does your flywheel actually have a thread in the flywheel were the bolt is? if it does then I got ripped off buying my thing its been nothing but a pain in the arse,but a learning experience though?

No
It has to suit the wr 125
Do some searching for wr125 flywheel puller
From memory it's 22 x 1.5
They were on eBay but no longer
The cr puller is 27 from memory

yes, the flywheel is threaded.

Rockdancer, the size 22 x 1.5 - is the 22mm? and 1.5mm the thickness of the puller?

The size for the 08wr125 and wr250 is 22mm dia - 1.5 is the thread spacing

There is one on ebay but its the type without the bolt that pushes in to remove flywheel

Not sure if 09 is the same.[/quote]

On ebay I've seen this:
http://www.ebay.co.uk/itm/Husqvarna...8?pt=UK_Motorcycle_Parts_13&hash=item4ac46062

It looks very similar to my 2009 WR125 flywheel but I don't know if anyone on this website can confirm it will fit. My wood-ruff-key is damaged and has damage the flywheel this is my interest in the flywheel, or not unless one of you UK riders has a spare flywheel. Mines marked FP5243 and BH11?