1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
    WR = 2st Enduro & CR = 2st Cross

125-200cc flywheel puller

Discussion in '2 Stroke' started by Travis Thompson, Jun 12, 2013.

  1. Travis Thompson Husqvarna
    A Class

    Husqvarna Motorcycle:
    1991 wxe 260
    Other Motorcycles:
    1978 yamaha xs750 special
    need a flywheel puller for 91 wxe 260. Not sure where to get one
  2. K.Forte' Husqvarna
    A Class

    Location:
    Any great singletrack trail..
    Husqvarna Motorcycle:
    2010 WR 125R
    Other Motorcycles:
    2004 Honda CRF 302X
    If you have a husky dealer near you they should have one,,if not CH sponcer Bills Motorcycle has some he'll know the size you need...
  3. troy deck Husqvarna
    Pro Class

    Location:
    Republic MO
    Husqvarna Motorcycle:
    87 250wr 12 cr125
    Other Motorcycles:
    kx65 ty80 rm80 kdx250
    motion pro makes a ton of'em just need too know the size
  4. Travis Thompson Husqvarna
    A Class

    Husqvarna Motorcycle:
    1991 wxe 260
    Other Motorcycles:
    1978 yamaha xs750 special
    I've Cotten it down this far and a little bolt stripped on that star shaped shaft on bottom right! What should I do now! The cases won't even budge are there any bolts I'm missing image.jpg

    Attached Files:

  5. rancher1 Husqvarna
    Pro Class

    Location:
    WA
    The other side of the main cases comes off first.
  6. Travis Thompson Husqvarna
    A Class

    Husqvarna Motorcycle:
    1991 wxe 260
    Other Motorcycles:
    1978 yamaha xs750 special
    got the flywheel pulled. The right side case still wont budge. Ive ben tapping it with hammer but still wont even crack open air hair. Last time i split open a dirtbike it came real easy. Are there any bolts on this one that are hidden. I got the two that are in the center.
  7. Travis Thompson Husqvarna
    A Class

    Husqvarna Motorcycle:
    1991 wxe 260
    Other Motorcycles:
    1978 yamaha xs750 special
    I've Ben trying to split cases and still no luck...I cranked on the bolt until it was extremely tight and tapped on it and won't move at all...help please...want to go riding again