125-200cc flywheel puller

What size is the fly wheel puller for a wr/cr 125 - 2013, I know its left hand and that's about it.

For the CR it's standard, same as a Honda CR125 or CR250. Officially it is a "27mm x 1.0mm (pitch), left-hand thread, male". Check with others here, the WR may be different as it has a completely different ignition.

The only left hand one I find is the 27mm x 1.0mm. So that must be it, I hope and thanks.

Neither are left hand threads and WR is not the same as a CR !! only problem is I have a huge box of assorted pullers and cant remember what one fits either of them

Wr125 uses a m22×1.5 normal thread

I see its about 22mm once i measure it,now just have to find one.

My CR is most certainly 27mm lh threads. So I agree, CR and WR are not the same , bet a CR IS LH threads.