1. 2 Stroke Husqvarna Motorcycles Made In Austria - About 2014 & Newer
     TE = 2st Enduro & TC = 2st Cross

TE/TC FMF Snap 081200

Discussion in '2st' started by robertaccio, Sep 18, 2015.

  1. robertaccio Husqvarna
    Pro Class

    Location:
    San Diego, Ca
    Husqvarna Motorcycle:
    2021 Husqvarna TE300i
    Other Motorcycles:
    99 HusqvarnaTE610, 94 Husaberg FC501
    It never listed new Huskys so without doing an air boot part number compatability check I just ordered the 081200 Snap for listed 07 KLR 650, 08-14 ktm250sx, 300xc 11 /250,300

    It doesn't fit. so I will cut and paste just for FYI, I will fit it from the carb side of the boot.
    robertaccio, Sep 18, 2015
    #1

  2. troy deck Husqvarna
    Pro Class

    Location:
    Republic MO
    Husqvarna Motorcycle:
    87 250wr 12 cr125
    Other Motorcycles:
    kx65 ty80 rm80 kdx250
    you did what? a snap for a 2t? im confused
    troy deck, Sep 18, 2015
    #2

  3. ptkatoomer Husqvarna
    Pro Class

    Location:
    San Diego area
    Husqvarna Motorcycle:
    None
    Other Motorcycles:
    2020 ktm 300 xc-w, 2020 ktm 500exc
    Thunderproducts.com makes a torque wing that sounds similar. They have them for the ktm 300 (so husky too).
    ptkatoomer, Sep 19, 2015
    #3
    robertaccio likes this.

  4. robertaccio Husqvarna
    Pro Class

    Location:
    San Diego, Ca
    Husqvarna Motorcycle:
    2021 Husqvarna TE300i
    Other Motorcycles:
    99 HusqvarnaTE610, 94 Husaberg FC501
    yyes may go that route the snap will not work in this machine (the one I have anyway wont work, even if i trim it)
    robertaccio, Sep 20, 2015
    #4