250-500cc Foot pegs - HVA WR/Yamaha YZ/WR compability?

Hi there,

Looking for new foot pegs for my HVA WR250-06. But my local dealers have none in store, but plenty in store for Yamaha YZ/WR´s.

I heard that these are compatible with HVA. Can someone confirm this?

And if so, which year/models?

Thanks!

believe the stock yamaha Ti pegs would fit with just a bit of grinding.

They will work, but they are not a direct fit. You will have to file or grind, the barrel that the pin slides through. Gas Gas and Yamaha are the same. I always used a GG application when I ordered foot pegs for my Husky, so can't tell you what year Yamaha pegs work. You can cross reference Yamaha and GG part numbers for the correct Yamaha pegs.

I can say that the 08 YZ 125 and 2012 CR 125 are not compatible. You need to grind the YZ pegs to fit.

fastway pegs you can adjust the height.

HERE YA GO! HI OR LOW GOOD PRICE TOO! http://www.motosportzhusqvarna.com/Husqvarna WR,CR 250-300.htm

Thanks for all the answers!

I put warp 9 footpegs on my 12 wr300. They were a tad snug at first (not like yz pegs, which I did try) but once worn in after a few rides they were great. Lots of grip and don't crumble or bend like the stock ones.