All 2st foot pegs

Hey all you all knowing Husky type peoples. Can anyone tell me if a foot peg off of a te/txc is the same as a 11 wr300? I'm not having any luck finding out and hate to call and waste a dealers time. Thanks in advance

after about 97 or 98 the standardized them
go to Halls online catalog and look up both bikes

99% sure they're all the same.

Thanks, finally figured it out. They are the same.

do any other bike pegs work? i dont have a husky dealer here any more and want to save on shipping.

Yamaha YZF/WRF, GasGas should fit!

A mate has a yammand gas gas bike and it turns out your spot on. Even the rear sproket fits from the Gas Gas on the smoker hub have new YZF pegs coming soon.

Thanks and sorry for the very late respons.

I put yz-f pegs on my 2014 cr125. I had to grind off a few mm so they would fit between the two plates, but the angle was perfect, the hole is the right diameter and they work great. One oem peg bent after 1 easy layover. I used TUSK pegs from Rockymountainatvmc.com Good deal too...

what year for the yzf pegs?

Any later model YZ pegs will work. You do have to grind them down a tiny bit to fit as dirt addict said.

The reason I ask is swapping to the yzf pegs is a more common mod for the yz. But different year yzf pegs had different widths, materials and height. Most people go for the 5xc pegs as they are the widest, stainless and are 5mm lower than the older and newest pegs. They went back to a taller peg in 2010.

Their part numbers are: 5XC-27411-M1-00 and 5XC-27421-M1-00